fbpx

Archives

Forestry professionals – NOC : 2122

Unit Group
2122 Forestry professionals
Forestry professionals conduct research, develop plans and administer and direct programs related to the management and harvesting of forest resources. They are employed by the forest industry, provincial and federal governments, consulting companies, educational institutions and other industries, or they may be self-employed.
Example Titles
appraisal forester
consulting forester
district forester
forest engineer
forester
forestry superintendent
regional inventory officer – forestry
registered professional forester (RPF)
View all titles
Main duties
Forestry professionals perform some or all of the following duties:
Plan and direct forest surveys and related studies and prepare reports and recommendations
Establish short- and long-term plans for management of forest lands and forest resources
Plan and direct woodlands harvesting, reforestation, silviculture and fire prevention and fire suppression programs, road building, wildlife management, environmental protection and insect and vegetation control programs
Negotiate terms and conditions of agreements and contracts for forest harvesting, forest management and leasing of forest lands
Monitor contract compliance and results of forestry activities
Ensure adherence to government regulations and company objectives
Plan and conduct public relations programs, and education and extension programs related to forestry
Develop and oversee programs for tree seedling production and woodlands nursery operations
Conduct advanced research in the areas of tree improvement, nursery seedling production, forest soils, forest ecology, forest mensuration, forest operations and other areas
Provide advice and recommendations, as a consultant on forestry issues, to private woodlot owners, municipal, provincial or federal governments or to companies.
Employment requirements
A bachelor’s degree in forestry or forestry engineering is required.
Certification as a forester or forest engineer by provincially chartered associations is required in provinces having such associations.
A two-year practicum of supervised work experience and professional examinations are usually required before registration.

Additional information
Supervisory and senior occupations in this unit group require additional experience.
With experience, mobility is possible to management positions in government and industry.

Classified elsewhere
Forest economists (in 4162 Economists and economic policy researchers and analysts )
Forestry and woodlands operations managers (in 0811 Managers in natural resources production and fishing )
Managers of government forestry policy and program administration (in 0412 Government managers – economic analysis, policy development and program administration )
Managers of research in forestry (in 0212 Architecture and science managers )
Classification Structure – 2 

Civil engineering technologists and technicians – NOC : 2231

Unit Group
2231 Civil engineering technologists and technicians
Civil engineering technologists and technicians provide technical support and services to scientists, engineers and other professionals, or may work independently in fields such as structural engineering, municipal engineering, construction design and supervision, highways and transportation engineering, water resources engineering, geotechnical engineering and environmental protection. They are employed by consulting engineering and construction companies, public works, transportation and other government departments and in many other industries.
Example Titles
bridge design technician
building materials technician
civil engineering technician
civil engineering technologist
construction technologist
foundation technologist
highway technician
municipal engineering assistant
soil technologist – civil engineering
specifications writer, construction
structural design technologist
structural investigator
View all titles
Main duties
Civil engineering technologists perform some or all of the following duties:
Develop engineering designs and drawings from preliminary concepts and sketches
Prepare construction specifications, cost and material estimates, project schedules and reports
Supervise or conduct field surveys, inspections or technical investigations of topography, soils, drainage and water supply systems, road and highway systems, buildings and structures to provide data for engineering projects
Conduct or supervise inspection and testing of construction materials
May supervise, monitor and inspect construction projects.
Civil engineering technicians perform some or all of the following duties:
Assist in developing engineering specifications and drawings
Participate in field surveys, inspections or technical investigations of topography, soils, drainage and water supply systems, road and highway systems, buildings and structures to provide data for engineering projects
Perform other technical functions in support of civil engineering activities.
Employment requirements
Completion of a two- or three-year college program in civil engineering technology or a closely related discipline is usually required for civil engineering technologists.
Completion of a one- or two-year college program in civil engineering technology is usually required for civil engineering technicians.
Certification in civil engineering technology or in a related field is available through provincial associations of engineering/applied science technologists and technicians and may be required for some positions.
A period of supervised work experience, usually two years, is required before certification.
In Quebec, membership in the regulatory body for professional technologists is required to use the title "Professional Technologist."
Additional information
There is mobility to related occupations, such as drafting technologists and technicians and construction inspectors and estimators.
Progression to construction supervisors or construction managers is possible with experience.
Classified elsewhere
Architectural technologists and technicians (2251)
Construction estimators (2234)
Construction inspectors (2264)
Construction managers (0711)
Drafting technologists and technicians (2253)
Land survey technologists and technicians (2254)
Urban and land use planners (2153)

Patternmakers – textile, leather and fur products – NOC : 5245

Unit Group
5245 Patternmakers – textile, leather and fur products
Patternmakers in this unit group create master patterns for the production of garments, footwear and other textile, leather or fur products. They are employed by pattern manufacturers, textile, leather or fur products manufacturers, or they may be self-employed.
Example Titles
dress patternmaker
embroidery patternmaker
fur garment patternmaker
garment patternmaker
leather products patternmaker
shoe patternmaker
textile products patternmaker
View all titles
Main duties
Patternmakers in this unit group perform some or all of the following duties:
  • Examine sketches, samples of articles and specifications of designs to determine number, size and shape of pattern parts and assess the amount of cloth required to make a product
  • Draw, lay out and cut master patterns of products
  • Outline parts of patterns on paper and mark patterns to indicate details such as the placement of pockets and pleats on garments, decorative stitching on shoe parts or eyelets on canvas products
  • Create pattern size variations from master patterns using computer or drafting instruments, or forward patterns to computer operator to create pattern size variations
  • Lay out master patterns on fabric and cut sample patterns
  • Mark size, identification, style and sewing instructions on sample patterns.
Employment requirements
  • Completion of secondary school is required.
  • College courses in design and patternmaking 
  • or
  • One to two years of on-the-job training are required.
  • Courses in computer-assisted patternmaking may be required.
Additional information
  • Progression to supervisory positions is possible with experience.
Classified elsewhere
  • Supervisors, textile, fabric, fur and leather products processing and manufacturing (9217)

Gas fitters – NOC : 7253

Unit Group
7253 Gas fitters
Gas fitters install, inspect, repair and maintain gas lines and gas equipment such as meters, regulators and heating units in residential, commercial and industrial establishments. They are employed by gas utility companies and gas servicing companies.
Example Titles
gas fitter
gas fitter apprentice
gas servicer
gas technician
industrial gas fitter-tester
View all titles
Main duties
Gas fitters perform some or all of the following duties:
  • Study drawings and specifications to determine the layout of the installation and materials required
  • Measure and mark reference points for installation of gas lines and equipment
  • Install and maintain gas meters and regulators and gas lines between gas unit and gas meter
  • Install, maintain and service gas heating units and their components, such as burners, valves and automatic controls
  • Test and replace defective equipment or components
  • Test and adjust control mechanisms and check pipes and piping connections for gas leaks using gas detecting devices
  • Attend to gas escape calls and assist in the investigation of gas fires and explosions
  • Prepare reports on work performed and condition of facilities
  • Advise clients regarding standards, safety features and maintenance of gas units and systems
  • Convert motor vehicles or appliances to use natural gas fuels
  • May repair and service gas appliances and related equipment.
Employment requirements
  • Completion of secondary school is usually required.
  • Completion of a two- or three-year gas fitter apprenticeship program 
  • or
  • Several years of work experience in a pipefitting trade and completion of a high school, college or industry gas fitter program are required.
  • Gas fitter trade certification is compulsory in Nova Scotia, Quebec, Alberta, British Columbia, the Yukon, the Northwest Territories and Nunavut.
  • A provincial gas fitter licence is usually required.
Additional information
  • Progression to supervisory positions is possible with experience.
Classified elsewhere
  • Appliance servicers and repairers (7332)
  • Plumbers (7251)
  • Steamfitters, pipefitters and sprinkler system installers (7252)
  • Supervisors of gas fitters (in 7203 Contractors and supervisors, pipefitting trades )

Concrete finishers – NOC : 7282

Unit Group
7282 Concrete finishers
Concrete finishers smooth and finish freshly poured concrete, apply curing or surface treatments and install, maintain and restore various masonry structures such as foundations, floors, ceilings, sidewalks, roads, patios and highrise buildings. They are employed by construction companies, cement and concrete contractors and manufacturers of precast concrete products, or they may be self-employed.
Example Titles
cement finisher apprentice
cement mason
concrete finisher
concrete mason
precast concrete finisher
View all titles
Main duties
Concrete finishers perform some or all of the following duties:
  • Check formwork, granular base and steel reinforcement materials and direct placement of concrete into forms or onto surfaces according to grade
  • Fill hollows and remove high spots to smooth freshly poured concrete
  • Operate power vibrator to compact concrete
  • Level top surface of concrete according to grade and depth specifications using straightedge or float
  • Impart desired finish to concrete surfaces using hand and power tools
  • Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete
  • Apply hardening and sealing compounds to cure surface of concrete
  • Waterproof, damp-proof and restore concrete surfaces
  • Repair, resurface and replace worn or damaged sections of floors, walls, roads and other concrete structures.
Employment requirements
  • Completion of secondary school is usually required.
  • Completion of a two- to four-year apprenticeship program 
  • or
  • Over three years of work experience in the trade and some high school, college or industry courses in cement finishing are usually required to be eligible for trade certification.
  • Trade certification for concrete finishers is compulsory in Quebec and available, but voluntary, in Newfoundland and Labrador, Nova Scotia, Prince Edward Island, New Brunswick, Manitoba, Alberta and British Columbia.
  • Trade certification for cement masons is available, but voluntary, in Ontario.
  • Red Seal endorsement is also available to qualified concrete finishers upon successful completion of the interprovincial Red Seal examination.
Additional information
  • The Red Seal endorsement allows for interprovincial mobility.
  • Progression to supervisory positions is possible with experience.
Classified elsewhere
  • Bricklayers (7281)
  • Concrete products machine operators (in 9414 Concrete, clay and stone forming operators )
  • Supervisors of concrete finishers (in 7205 Contractors and supervisors, other construction trades, installers, repairers and servicers )

Electrical and electronics engineering technologists and technicians – NOC : 2241

Unit Group
2241 Electrical and electronics engineering technologists and technicians
Electrical and electronics engineering technologists and technicians may work independently or provide technical support and services in the design, development, testing, production and operation of electrical and electronic equipment and systems. They are employed by electrical utilities, communications companies, manufacturers of electrical and electronic equipment, consulting firms, and in governments and a wide range of manufacturing, processing and transportation industries.
Example Titles
communications technologist
electrical engineering technician
electrical engineering technologist
electricity distribution network technologist
electronics design technologist
electronics engineering technician
electronics engineering technologist
electronics manufacturing technician
electronics manufacturing technologist
lighting technologist
metering technologist
microwave maintenance technician
production support technician – electronics manufacturing
View all titles
Main duties
Electrical and electronics engineering technologists perform some or all of the following duties:
  • Design, develop and test power equipment and systems, industrial process control systems, telecommunication, broadcast, recording and audiovisual systems, micro-electronic systems and circuits, computers, computer systems and networks, and computer software
  • Supervise the building and testing of prototypes according to general instructions and established standards
  • Conduct or supervise the installation, commissioning, and operation of electrical and electronic equipment and systems other than aircraft electronics or instruments
  • Carry out applied research in fields of electrical and electronic engineering and physics under the direction of scientists or engineers
  • Set up and operate specialized and standard test equipment to diagnose, test and analyze the performance of electrical and electronic components, assemblies and systems
  • Write specifications, schedules and technical reports and control schedules and budgets.
Electrical and electronics engineering technicians perform some or all of the following duties:
  • Assist in the design, development and testing of electrical and electronic components, equipment, and systems
  • Assist in inspection, testing, adjusting and evaluation of incoming electrical, electro-mechanical and electronic components and assemblies to ensure conformance with product specifications and tolerances
  • Conduct life tests (burn-ins) on assemblies and record and analyze results
  • Assist in building and testing prototypes to specifications
  • Carry out a limited range of technical functions in support of research in electrical and electronic engineering and physics
  • Install, operate and maintain electrical and electronic equipment and systems
  • Calibrate electrical or electronic equipment and instruments according to technical manuals and written instructions
  • Collect and compile operational or experimental data and assist in the preparation of estimates, schedules, budgets, specifications and reports.
Employment requirements
  • Completion of a two- or three-year college program in electrical or electronics engineering technology, computer engineering technology, telecommunications technology or an equivalent is usually required for electrical or electronics engineering technologists.
  • Completion of a one- or two-year college program in electrical or electronics engineering technology is usually required for electrical or electronics engineering technicians.
  • Certification in electrical or electronics engineering technology or in a related field is available through provincial associations of engineering/applied science technologists and technicians and may be required for some positions.
  • A period of supervised work experience, usually two years, is required before certification.
  • In Quebec, membership in the regulatory body for professional technologists is required to use the title "Professional Technologist."
Additional information
  • There is mobility to other related occupations such as technical sales, electronics service technicians, instrument technicians and avionics technicians.
  • Progression to managerial positions in engineering, production or operations is possible with experience.
Classified elsewhere
  • Aircraft instrument, electrical and avionics mechanics, technicians and inspectors (2244)
  • Electronic service technicians (household and business equipment) (2242)
  • Engineering managers (0211)
  • Industrial instrument technicians and mechanics (2243)
  • Manufacturing managers (0911)
  • Technical sales specialists – wholesale trade (6221)

Supervisors, general office and administrative support workers – NOC : 1211

Unit Group
1211 Supervisors, general office and administrative support workers
Supervisors in this unit group supervise and co-ordinate the activities of workers in minor groups: General Office Workers (141) and Office Equipment Operators (142). They are employed throughout the public and private sectors.
Example Titles
clerical supervisor
data entry supervisor
filing clerks supervisor
hospital admitting clerks supervisor
personnel clerks supervisor
records office supervisor
registry supervisor
supervisor, switchboard operators
View all titles
Main duties
Supervisors in this unit group perform some or all of the following duties:
Co-ordinate, assign and review the work of clerks engaged in the following duties: word processing; record keeping and filing; operating telephones and switchboards; data entry; desktop publishing; and other activities involving general office and administrative skills
Establish work schedules and procedures and co-ordinate activities with other work units or departments
Resolve work-related problems and prepare and submit progress and other reports
Train workers in job duties, safety procedures and company policies
Requisition supplies and materials
Ensure smooth operation of office equipment and machinery, and arrange for maintenance and repair work
May perform the same duties as workers supervised.
Employment requirements
Completion of secondary school is required.
Completion of college courses related to area supervised is usually required.
Experience in the occupation supervised is usually required.

Classified elsewhere
Office managers (in 1221 Administrative officers )
Supervisors, finance and insurance office workers (1212)
Supervisors, library, correspondence and related information workers (1213)
Supervisors, mail and message distribution occupations (1214)
Supervisors, supply chain, tracking and scheduling co-ordination occupations (1215)
Classification Structure – 1 

Supervisors, general office and administrative support workers – NOC : 1211

administrative services supervisor
attendance records supervisor
clerical supervisor
contract clerks supervisor
co-ordinator, word processing service
data control supervisor
data entry clerks supervisor
data entry supervisor
desktop publishing supervisor
desktop publishing system supervisor
EDP (electronic data-processing) unit – supervisor
electronic data-processing (EDP) unit – supervisor
filing clerks supervisor
filing service supervisor
general office clerks supervisor
hospital admitting clerks supervisor
night supervisor, telephone system
nursing registry supervisor
office clerks supervisor
office machine operators supervisor
office services supervisor
office supervisor
operations supervisor
personnel clerks supervisor
photocopy unit supervisor
price information clerks supervisor
receptionists and hostesses supervisor
receptionists supervisor
records clerks supervisor
records management services supervisor
records management supervisor
records office supervisor
registration unit supervisor
registry supervisor
supervisor, attendance records
supervisor, contract clerks
supervisor, data control
supervisor, data entry clerks
supervisor, desktop publishing operators
supervisor, desktop publishing system
supervisor, EDP (electronic data-processing) unit
supervisor, electronic data processing (EDP) unit
supervisor, filing clerks
supervisor, filing service
supervisor, general office clerks
supervisor, hospital admitting clerks
supervisor, nursing registry
supervisor, office clerks
supervisor, office machine operators
supervisor, office services
supervisor, personnel clerks
supervisor, photocopy unit
supervisor, price information clerks
supervisor, receptionists
supervisor, receptionists and hostesses
supervisor, records clerks
supervisor, records office
supervisor, registration unit
supervisor, switchboard operators
supervisor, telephone operators
supervisor, unit clerks
supervisor, word processing unit
switchboard operators supervisor
telephone operators supervisor
telephone service supervisor
telephone system night supervisor
telephone system supervisor
unit clerks supervisor
word processing service co-ordinator
word processing unit supervisor

Industrial instrument technicians and mechanics – NOC : 2243

Unit Group
2243 Industrial instrument technicians and mechanics
Industrial instrument technicians and mechanics repair, maintain, calibrate, adjust, and install industrial measuring and controlling instrumentation. They are employed by pulp and paper processing companies, nuclear and hydro power generating companies, mining, petrochemical and natural gas companies, industrial instrument and other manufacturing companies, and by industrial instrument servicing establishments. 
Example Titles
apprentice industrial instrument mechanic
industrial instrument mechanic
instrument technician, industrial
instrumentation technician, industrial
process control equipment mechanic
View all titles
Main duties
Industrial instrument technicians and mechanics perform some or all of the following duties:
  • Consult manufacturer’s manuals, circuit diagrams and blueprints to determine tests and maintenance procedures for instruments used for measuring and controlling flow, level, pressure, temperature, chemical composition and other variables in manufacturing and processing
  • Inspect and test operation of instruments and systems to diagnose faults using pneumatic, electrical and electronic testing devices and precision measuring instruments
  • Repair and adjust system components, such as sensors, transmitters and programmable logic controllers, or remove and replace defective parts
  • Calibrate components and instruments according to manufacturers’ specifications
  • Perform scheduled preventive maintenance work and complete test and maintenance reports
  • Install control and measurement instruments on existing and new plant equipment and processes
  • Consult with and advise process operators.
Employment requirements
  • Completion of secondary school is usually required.
  • Completion of a four- or five-year apprenticeship program in industrial instrument repair 
  • or
  • Completion of a two-year college program in industrial instrumentation technology and several years of work experience are usually required for trade certification.
  • Instrumentation and control technician trade certification is available, but voluntary, in all provinces and territories, except in Quebec.
  • Red Seal endorsement is also available to qualified instrumentation and control technicians upon successful completion of the interprovincial Red Seal examination.
Additional information
  • The Red Seal endorsement allows for interprovincial mobility.
  • Progression to supervisory positions is possible with experience.
Classified elsewhere
  • Aircraft instrument technicians (in 2244 Aircraft instrument, electrical and avionics mechanics, technicians and inspectors )
  • Electrical and electronics engineering technologists and technicians (2241)
  • Industrial mechanics (in 7311 Construction millwrights and industrial mechanics )

Deck officers, water transport – NOC : 2273

Unit Group
2273 Deck officers, water transport
Deck officers, water transport, operate and command ships or self-propelled vessels to transport passengers and cargo on oceans and coastal and inland waters, and supervise and co-ordinate the activities of deck crews. This unit group also includes Canadian Coast Guard deck officers. They are employed by marine transportation companies and federal government departments.
Example Titles
deck officer – water transport
ferryboat master
first mate, ship
master mariner
navigation officer, Coast Guard vessel
second mate, ship
ship pilot
ship’s captain
ship’s mate
third mate, ship
tugboat captain
watchkeeping officer, Coast Guard vessel
View all titles
Main duties
Deck officers perform some or all of the following duties:
  • Command and operate ships or other self-propelled vessels, such as barges or oil rigs, to transport passengers and cargo
  • Command and operate coast guard vessels to provide ice-breaking and search and rescue services, and to maintain control over ships operating in Canadian waters
  • Board vessels at berth or from pilot boats to advise ships’ captains on the course to steer for safe passage into and out of ports, seaways or other waterways under pilotage authority
  • Plan and execute safe navigational passage using navigational aids
  • Determine geographical position using navigational instruments, maps and charts
  • Guide vessels in rivers, canals, and other confined or hazardous waters and waterways
  • Maintain vessels’ navigational instruments and equipment
  • Direct and oversee the loading and unloading of cargo
  • Supervise and co-ordinate the activities of deck crews
  • Record vessel progress, crew activities, weather and sea conditions in the ship’s log.
Employment requirements
  • Completion of secondary school is required.
  • Completion of deck officer cadet program from an approved nautical institute 
  • or
  • One to three years of experience as a member of a deck crew is required.
  • A deck officer certificate of competency, issued by Transport Canada, is required.
  • For ship pilots, a ship pilot licence and a master certificate of competency are required.
Additional information
  • Transport Canada administers a deck officer certification program, consisting of several levels. Progression from one level of certification to the next requires additional experience, training and testing.
  • Mobility between employers is possible for positions requiring the same level of certification.
  • Progression to management positions in transportation is possible with experience.
Classified elsewhere
  • Engineer officers, water transport (2274)
  • Fishing masters and officers (8261)
  • Shore captains (in 0731 Managers in transportation )
  • Water transport deck and engine room crew (7532)