fbpx
State Capital Visa subclass 189 Visa subclass 190 Visa subclass 489
ACT Australian Capital Territory Canberra
NSW New South Wales Sydney
NT Northern Territory Darwin
QLD Queensland Brisbane
SA South Australia Adelaide
TAS Tasmania Hobart
VIC Victoria Melbourne
WA Western Australia Perth

ANZSCO 394211: FURNITURE FINISHER

Major Group: 3 – Technicians and Trades Workers | Sub-Major Group: 39 – Other Technicians and Trades Workers | Minor Group: 394 – Wood Trades Workers | Unit Group: 3942 – Wood Machinists and Other Wood Trades Workers
Description: Applies finishes, such as stain, lacquer, paint, oil and varnish, to furniture, and polishes and waxes finished furniture surfaces.
Skill Level 3 : Occupations at Skill Level 3 have a level of skill commensurate with one of the following:
– NZ Register Level 4 qualification
– AQF Certificate IV or
– AQF Certificate III including at least two years of on-the-job training.
At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.
Specialisations
  • French Polisher
Specialisation titles are any commonly used titles which refer to a subset of jobs belonging to the occupation designated in the principal title. These jobs involve the performance of specialised tasks rather than the broader range of tasks usually performed in the occupation.

UNIT GROUP 3942: WOOD MACHINISTS AND OTHER WOOD TRADES WORKERS

Description: Set up and operate woodworking machines and wood turning lathes to shape wood stock, finish and polish furniture, and make picture frames and frame paintings, photographs and other artwork.
Skill Level: Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.
– In Australia:
AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
– In New Zealand:
NZ Register Level 4 qualification (ANZSCO Skill Level 3)
At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.
Tasks
  • studying drawings, work orders and sample parts to determine specifications
  • determining tooling and machine requirements and sequence of operations
  • setting up woodworking machines and wood stock for correct cutting, planning, turning, shaping and sanding
  • operating machines to cut, plane, turn, shape and sand work pieces
  • removing old finishes by stripping with steel wool and glasspaper, and by applying solvents and paint strippers, and removing softened finishes by scraping
  • applying varnish, shellac, lacquer, stains and paint to surfaces and polishing and waxing finished surfaces
  • fitting and fastening frame pieces
  • mounting backing materials and subjects for framing
Other occupations in this Unit Group
  • 394212 – Picture Framer
  • 394213 – Wood Machinist
  • 394214 – Wood Turner
  • 394299 – Wood Machinists and Other Wood Trades Workers nec