fbpx
Call Now!+61 485 952 645

Metal Polisher -ANZSCO : 322115

Skill Level 3
State Capital Visa subclass 189 Visa subclass 190 Visa subclass 489
ACT Australian Capital Territory Canberra
NSW New South Wales Sydney
NT Northern Territory Darwin
QLD Queensland Brisbane
SA South Australia Adelaide
TAS Tasmania Hobart
VIC Victoria Melbourne
WA Western Australia Perth

ANZSCO 322115: METAL POLISHER

Major Group: 3 – Technicians and Trades Workers | Sub-Major Group: 32 – Automotive and Engineering Trades Workers | Minor Group: 322 – Fabrication Engineering Trades Workers | Unit Group: 3221 – Metal Casting, Forging and Finishing Trades Workers
Description: Polishes metal to impart smooth, reflective and other finishes.
Skill Level 3 : Occupations at Skill Level 3 have a level of skill commensurate with one of the following:
– NZ Register Level 4 qualification
– AQF Certificate IV or
– AQF Certificate III including at least two years of on-the-job training.
At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

UNIT GROUP 3221: METAL CASTING, FORGING AND FINISHING TRADES WORKERS

Description: Fabricate mould patterns and form sand moulds and cores for the production of metal castings, heat and hammer metal into shape, and make, repair, coat and polish metal parts and articles.
Skill Level: Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below.
– In Australia:
AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
– In New Zealand:
NZ Register Level 4 qualification (ANZSCO Skill Level 3)
At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.
Tasks
  • selecting metal stock for job requirements
  • heating metal in forges and furnaces and hammering, punching and cutting metal using hand tools and machine presses
  • tempering and hardening finished articles by quenching in oil or water baths or by cooling gradually in air
  • preparing electrolytic and silver solutions for electroforming, and applying solution to the objects to be coated
  • setting and adjusting controls to regulate electric current and depositing of coating on objects
  • preparing horses’ hooves for shoeing, nailing horseshoes to hooves, and trimming hooves
  • cutting, trimming, shaping and smoothing stock to form mould patterns
  • filling boxes with sand and setting patterns in place, and pouring molten metal into moulds
  • applying refractory paint and positioning cores in moulds
  • finishing metal and articles by polishing and buffing and applying shellac, lacquer, paint and other finishes
Other occupations in this Unit Group
  • 322111 – Blacksmith
  • 322112 – Electroplater
  • 322113 – Farrier
  • 322114 – Metal Casting Trades Worker